← Back to directory

U-value of a building element by the method of DIN EN ISO 6946: layer resistance...

https://rechen.halowerk.com/v1/u-value

Overview

U-value of a building element by the method of DIN EN ISO 6946: layer resistances from thickness and conductivity, surface resistances by heat-flow direction, upper/lower limit method for inhomogeneous layers, comparison with GModG Anlage 7. R_T = R_si + sum(d/lambda or given R) + R_se, U = 1/R_T (+ caller correction dU). Surface resistances 0.10/0.13/0.17 (upward/horizontal/downward) and 0.04 m2K/W as reproduced from DIN EN ISO 6946 in Wikipedia (CC BY-SA 4.0), overridable.

Protocol x402 (POST)
Price $0.0030
Payment Asset USD Coin
Payment Network eip155:8453
Category uncategorized
Provider rechen
Source bazaar
Indexed 2026-11-21 05:10:43

Health

Status unknown
Latency (p50) —
Uptime (30d) —
Reliability Score —
Last Checked Never
Last Healthy Never
Consecutive Failures 0

x402 Payment Validation

Payment Requirements —
Asset Verified —
Facilitator —

Input Schema

{ "body": { "component": "external_wall", "layers": [ { "lambda": 0.7, "name": "gypsum plaster", "thickness_m": 0.015 }, { "lambda": 0.45, "name": "brick", "thickness_m": 0.24 }, { "lambda": 0.035, "name": "EPS", "thickness_m": 0.14 }, { "lambda": 0.87, "name": "render", "thickness_m": 0.01 } ] }, "bodyType": "json", "method": "POST", "type": "http" }

Output Schema

{ "example": { "limitations": [ "Information computed by formula and statutory rules from the stated parameters; not legal, tax, funding or energy advice and no substitute for planning by a qualified professional.", "Conductivities, air-layer resistances and corrections are inputs; elements in contact with the ground (DIN V 18599-2, ISO 13370) and thermal bridges are not covered.", "The upper/lower limit method is valid when the ratio of upper to lower limit does not exceed 1.5; otherwise a numerical calculation is needed." ], "result": { "delta_u": 0, "gmodg_anlage7": { "applies_to": "replacement, renewal or first installation of external components (§ 36 GModG), residential >= 19 °C", "complies": true, "component": "external_wall", "item": "1a/1b", "u_max": 0.24 }, "heat_flow": "horizontal", "layers": [ { "name": "gypsum plaster", "r_value": 0.0214 }, { "name": "brick", "r_value": 0.5333 }, { "name": "EPS", "r_value": 4 }, { "name": "render", "r_value": 0.0115 } ], "legal_basis": { "checked": "2026-11-01", "norms": [ "§ 36 GModG", "§ 37 GModG", "Anlage 7 GModG" ], "parameters_valid": { "valid": "GModG Anlage 7 values as in force on 2026-11-01" }, "sources": [ "https://www.gesetze-im-internet.de/geg/", "https://de.wikipedia.org/w/index.php?title=W%C3%A4rme%C3%BCbergangswiderstand&oldid=212692597" ], "version": "GModG as amended by the Act of 23.07.2026; calculation method DIN EN ISO 6946 (no standard tables reproduced)" }, "r_total": 4.7363, "rse": 0.04, "rsi": 0.13, "surface_resistance_source": "Wärmeübergangswiderstände nach DIN EN ISO 6946 wie wiedergegeben in Wikipedia, Artikel 'Wärmeübergangswiderstand', Revision 212692597 (CC BY-SA 4.0), abgerufen 01.11.2026; GModG § 37 Abs. 1 Nr. 2 verweist auf DIN 4108-4:2017-03 i. V. m. DIN EN ISO 6946:2008-04", "u_value": 0.211 }, "service": "u-value", "status": "success" }, "type": "json" }