← Back to directory

Interstitial condensation check by the steady-state Glaser method for a layered ...

https://rechen.halowerk.com/v1/condensation-risk

Overview

Interstitial condensation check by the steady-state Glaser method for a layered building element under caller-given climate: temperatures, saturation and vapour pressures per interface, condensation planes and rate, surface condensation. Temperature profile from the thermal resistances (R_si, d/lambda, R_se); saturation vapour pressure per interface by the Magnus formula (WMO-No.

Protocol x402 (POST)
Price $0.0030
Payment Asset USD Coin
Payment Network eip155:8453
Category uncategorized
Provider rechen
Source bazaar
Indexed 2026-11-21 05:10:47

Health

Status unknown
Latency (p50) —
Uptime (30d) —
Reliability Score —
Last Checked Never
Last Healthy Never
Consecutive Failures 0

x402 Payment Validation

Payment Requirements —
Asset Verified —
Facilitator —

Input Schema

{ "body": { "inside": { "relative_humidity_percent": 50, "temperature_c": 20 }, "layers": [ { "lambda": 2, "mu": 80, "name": "concrete", "thickness_m": 0.2 }, { "lambda": 0.04, "mu": 1, "name": "mineral wool", "thickness_m": 0.1 }, { "lambda": 1, "mu": 1000, "name": "vapour-tight cladding", "thickness_m": 0.01 } ], "outside": { "relative_humidity_percent": 80, "temperature_c": -5 }, "period_hours": 2160 }, "bodyType": "json", "method": "POST", "type": "http" }

Output Schema

{ "example": { "limitations": [ "Information computed by formula and statutory rules from the stated parameters; …", "Steady-state Glaser method: no moisture storage, capillary transport, rain, sorp…", "Climate cases, evaporation periods and acceptance limits of DIN 4108-3 are not r…" ], "result": { "air_vapour_permeability": 1.8698048585961754e-10, "condensation": true, "condensation_planes": [ { "interface": "after mineral wool", "mass_kg_per_m2": 0.05366, "position_sd_m": 16.1, "rate_g_per_m2h": 0.02484, "temperature_c": -4.55 } ], "heat_flux_w_m2": 8.9928, "interfaces": [ { "exceeds_saturation_without_condensation": false, "interface": "inner surface", "linear_vapour_pressure_pa": 1166.3, "position_sd_m": 0, "saturation_pressure_pa": 2169.12, "temperature_c": 18.831 }, { "exceeds_saturation_without_condensation": false, "interface": "after concrete", "linear_vapour_pressure_pa": 648.35, "position_sd_m": 16, "saturation_pressure_pa": 2050.3, "temperature_c": 17.932 }, { "exceeds_saturation_without_condensation": true, "interface": "after mineral wool", "linear_vapour_pressure_pa": 645.11, "position_sd_m": 16.1, "saturation_pressure_pa": 417.45, "temperature_c": -4.55 } ], "legal_basis": { "checked": "2026-11-01", "norms": [ "§ 11 GModG (minimum thermal protection per DIN 4108-2/-3 applies to new building…" ], "parameters_valid": { "valid": "physical method, no time-dependent parameters" }, "sources": [ "https://www.gesetze-im-internet.de/geg/" ], "version": "GModG as amended 23.07.2026; physics: Magnus formula WMO-No. 8 Annex 4.B, Schirm…" }, "method": "steady-state Glaser method; vapour pressure curve = lower convex hull of boundar…", "partial_pressure_inside_pa": 1166.3, "partial_pressure_outside_pa": 321.39, "r_total": 2.78, "sd_total_m": 26.1, "surface_condensation_risk": false, "total_mass_kg_per_m2": 0.05366, "total_rate_g_per_m2h": 0.02484 }, "service": "condensation-risk", "status": "success" }, "type": "json" }